-
About Us
-
Products
-
-
-
Contact Us
How to remove rock plate glue
Release time:
2024-07-03 16:01
The removal of the glue on the rock plate can be carried out by the following methods:
Physical methods:
Shovel glue: in the glue just after the construction, you can use the blade to quickly eradicate the uncured glue. This method is suitable for new construction glue and can be carried out before the glue is not fully cured.
Sanding: For glue that has been cured for a long time, sandpaper can be used for sanding. recommend the use of 600 sandpaper, do not need to add water, dry grinding can be directly.
Chemical methods:
Use rock plate glue remover: There are special rock plate glue removers on the market, which can be used to remove various types of glue, such as marble glue, AB glue, double-sided glue, etc., and will not damage the surface of the rock plate. This kind of glue remover can choose the product suitable for your needs at the time of purchase.
The above methods can be selected according to the type of glue and the degree of curing to ensure that the surface of the rock plate is protected from damage while removing the glue.
Previous Page
Next Page
Related News
Tile glue can be used for the wall on the rock plate, but it is recommended to use glue that focuses on the wall bonding construction on the rock plate. It has firm bonding force, does not fall off, has good seismic effect, and is finished in one decoration. It is not necessary to worry about the falling off of the background wall. It is more important to rest assured and comfortable. So the background wall once off, the accident will have what harm?
Rock slab seamless splicing process (correct rock slab splicing installation method)
Rock board has exquisite workmanship, beautiful appearance, good decorative effect, many styles, and is not easy to hide dirt, so it is widely used in various decoration scenes such as living room background wall, kitchen countertop, bathroom sink, wardrobe door panel, tea table, cabinet, stair corner, etc. Generally, 45-degree seamless splicing method is usually used when closing the positive angle of the rock plate.
Three aspects to judge the quality of rock plate adhesive
Rock plate glue is a kind of adhesive specially designed for high-end rock plate. It has the advantages of fast curing, firm bonding after curing and long service life. Earthquake resistance, anti-sliding; Easy construction, good polishing; Clean taste and environmental protection, no yellowing and discoloration; High and low temperature resistance, etc. Today, we will analyze from three aspects and teach you how to choose a practical rock plate glue.
Why should special glue be used for rock plate splicing?
Nowadays, interior decoration design strives to be simple and atmospheric, which is convenient for daily cleaning. Naturally, there are certain requirements for decoration plates. Rock plate decoration and furniture have become a new hot spot in the industry in the past two years, and the rock plate specifications are relatively large, which is not applicable to the tile glue generally used for paving ceramic tiles. Because of the influence of factors such as the water absorption rate of bricks, super soft rock plate glue must be selected.
Use rock plate glue remover: There are special rock plate glue removers on the market, which can be used to remove various types of glue, such as marble glue, AB glue, double-sided glue, etc., and will not damage the surface of the rock plate. This kind of glue remover can choose the product suitable for your needs at the time of purchase
TIANHE RESIN
TIANHE Wechat
National Service Hotline:
Address: Toumen Port Economic Development Zone, Linhai City, Taizhou City, Zhejiang Province
National Service Hotline: 4001-576-001
Telephone: 86-576-85890909
E-mail: 1812@vip.163.com
Copyright © 2024 ZheJiang TianHe Resin Co.,Ltd. All Rights Reserved.