Related Products

Home decoration adhesive (epoxy pure white type)

Environmentally friendly and odorless, cured with high whiteness, high resistance to yellowing, and high adhesive strength

Crystal white glue

Crystal white glue is a non flowing two-component product developed with high yellowing resistance resin and high-quality weather resistant mineral fillers.

Crystal Porcelain Rock Plate Composite Adhesive SA-J110

SA-J110 has high adhesive strength and is suitable for seamless ceramic pots on rock slabs, as well as beautiful seams and splices at 45 ° and 90 ° angles on rock slabs.

Number of views:

1000

Crystal Porcelain Rock Plate Composite Adhesive SA-J110

SA-J110 has high adhesive strength and is suitable for seamless ceramic pots on rock slabs, as well as beautiful seams and splices at 45 ° and 90 ° angles on rock slabs.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Quantity

Stock:

Category

Inquiry



Product description

Parameters

规格:

Product Introduction

SA-J110 has high adhesive strength and is suitable for seamless ceramic pots on rock slabs, as well as beautiful seams and splices at 45 ° and 90 ° angles on rock slabs. It is also suitable for bonding and bonding marble, granite, quartz stone, artificial marble, wood, and ceramics. Especially suitable for the bonding needs of white boards with high resistance to yellowing and high requirements for mold resistance. There are various colors to choose from, including white, light gray, medium gray, deep gray, and black

Characteristics of Crystal Porcelain

Zero yellowing, no yellowing for 30 years;
Clean, environmentally friendly, and mold resistant, with zero VOC emissions;
FDA food grade certification in the United States;
High brightness, good polishing brightness;
High adhesive strength, resistant to high and low temperatures;
Solidified without bubbles, waterproof, oil proof, and stain resistant

TECHNICAL INDEX

Serial Number	Project		TECHNICAL INDEX
1	Compression shear strength (Rock slab - Rock slab)	Standard conditions	18 Mpa
		Heat-resisting	20 Mpa
		Water resistance	15 Mpa
		Frost resistance	17 Mpa
2	Physical characteristics and working hours	Density	1.1-1.2
		-5-10 ℃	10-15 min
		15-25 ℃	5-8 min
		25-35 ℃	3-5 min

NET: 120ml Mixing ratio: 2:1

Note

1、Both components of the adhesive solution must be stored in a sealed manner. If the adhesive solution is not used up after opening the lid, it should be sealed in a timely manner.

2、The main ingredient of this product is modified resin, which is harmless to the human body, but should not come into contact with the eyes. If in contact with the eyes, rinse immediately with water or seek medical attention.

3、Tools should be cleaned immediately after use, and uncured adhesives can be scraped or cleaned with acetone.

4、Safety measures in the workplace: Gloves, masks, eye protectors, and other items must be present, and the workplace must maintain ventilation.

This product should be stored in a sealed and dry place at room temperature, away from light. The original packaging is valid for 12 months.